With the development of technology and innovation, there are various automation devices around us, and these automation devices are still widely used in the industry. For example, our touch welding machine is like this. So, what are the inspection processes before welding with a touch welding machine?

Firstly, it is necessary to strictly inspect the welding machine and its ancillary equipment to ensure the normal operation of circuits, water circuits, gas circuits, and mechanical devices.

Secondly, components such as instruments, switches, buttons, knobs, valves, indicator lights, etc. must be intact, adjustable flexibly, and the indication data clear and accurate.

Thirdly, move the welding machine to the vicinity of the welding position and turn on the main power switch; Turn on the power switch and cooling water system of this machine, ensure that the circulating cooling water circuit is unobstructed, then press the control power switch on the CNC controller of this motor to the on position, select the welding parameters according to the thickness of the material being welded, and adjust the parameters by turning the "work debugging" switch to the debugging position. After adjustment, turn the switch to the running state to start welding.

The above is what the editor has introduced to you about the pre welding inspection process of the touch welding machine. We hope it can be helpful to you. If you have any other questions, please feel free to consult us.